Types and functions of common stainless steel parts

Because stainless steel parts have good corrosion resistance, so it can make structural parts to maintain the integrity of engineering design, can meet the needs of architects and structural designers. So what are the common stainless steel parts, its specific role is what? Below by the new material xiaobian dahong for everyone to briefly introduce the types and functions of common stainless steel parts.

Common stainless steel parts are: wood screws, gaskets, baffle ring, pin, rivet, components and joint pairs, welding nails.

The functions of the above stainless steel parts are as follows:

1.Wood screw: also be similar with machine screw, but the thread on screw rod is special wood screw USES rib, can spin directly into woodiness component (or part) in, use for the metal that takes through hole (or blame metal) part and woodiness component fastening connection together. MIM technical experts remind you that this connection is also a removable connection.

2.Washer: divided into two categories: a class of fasteners with the shape of an oblate ring, placed between the support surface of bolts, screws or nuts and the surface of the connecting parts, plays a role in increasing the surface area of the connected parts, reducing the pressure per unit area and protecting the surface of the connected parts from damage; Another type of elastic washer, also can play a role in preventing nut back loose.

3.Baffle ring: it is installed in the shaft groove or hole groove of the machine or equipment, and it plays a role in preventing the parts on the shaft or hole from moving left and right.

4.Pin: mainly used for positioning parts, some parts can also be used to connect, fix parts, transfer power or lock other fasteners.

5.Rivet: a fastener consisting of two parts, the head and the nail rod, used to fasten two parts (or components) connected with a through-hole so that they become a whole. MIM industry leading manufacturers of this form of connection known as rivet connection, referred to as riveting. Da hong new material small make up special remind everyone, because want to make the two parts that connect together separate, need to destroy the rivet on the part, because this willow is joined, belong to and cannot disassemble join.

6.Assembly: a class of fasteners supplied in combination, such as a machine screw (or bolt, self-supplied screw) supplied in combination with a plain washer (or spring washer, lock washer).

7.Connecting pair: refers to a kind of fastener supplied by a combination of some special bolts, nuts and washers, such as high-strength hexagon bolt connecting pair for steel structure.

8.Welding nail: an abnormal fastener made up of light energy and nail head (or no nail head), which is fixed to a part (or component) by welding method so as to connect with other standard stainless steel parts.

The above is by dahong new material small make up for everyone simple introduction about the types and functions of common stainless steel parts, more about MIM technology and MIM material related content, welcome to consult guangdong dahong new material metal powder injection MIM technology professional team to answer for you!